Giá: 90.000.000 VND
Chi tiết sản phẩm
Model : GSP-830
Hãng : GW Instek
Xuất xứ : Đài Loan
Bảo hành : 12 tháng
1) Tần số
Tần số : 9Khz ~ 3Ghz
Độ già hóa :± 10ppm, 0~50°C, 5ppm/năm
Span : 2Khz ~ 3Ghz
Nhiễu pha : -80dBc/Hz @1GHz 20kHz
Sweep tiem : 50ms ~ 25.6s
2) Độ phân giải băng thông
Giải : 3kHz, 30kHz, 300kHz, 4MHz
Độ chính xác : 15%
3) Biên độ
Giải đo :
-103dBm ~ +20dBm: 1MHz ~ 15MHz, Ref.Level @ -30dBm
-117dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-110dBm
-114dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-110dBm
Bảo vệ qua tải : Max. +30dBm, ±25VDC
Mức tiêu chuẩn : 110dBm ~ +20dBm
Độ chính xác : ±1dB
4) Tạo sóng đồng chỉnh (Phụ kiện tùy chọn)
Tần số : 9k ~ 3Ghz
Biên độ : -50dBm ~ 0dBm
Độ chính xác :±1dB@100MHz, 0dBm
Nhiễu hài : <-30dBc
Kết nối : Kiểu N
RF output VSWR: < 2:1
4) Thông số cơ bản khác
Mức nhiễu :
<-135±1dBm/Hz: 1MHz ~ 15MHz, Ref.Level @ -30dBm
<-149dBm/Hz, typical -152dBm/Hz: 15MHz ~ 1GHz, Ref.Level ≧-110dBm
<-146dBm/Hz, typical -149dBm/Hz: 1GHz ~ 3GHz, Ref.Level ≧-110dBm
Độ méo hài : <-60dBc RF Input <-40dBm
Đầu vào RF : N - F, 50 Ohm
Điểm ghi : 10 điểm đỉnh
Giao tiếp : RS232, USB, VGA, GPIB (Tùy chọn)
Màn hình : 640x480, TFT LCD
Nguồn : AC 100 ~ 240V, 50/60Hz
Khối lượng : 6kg
Phụ kiện gồm : Đầu nguồn, HDSD, USB Cable
| REQUENCY | |
| Frequency Range | 9kHz ~ 3GHz |
| Aging Rate | ± 10ppm, 0~50°C, 5ppm/yr |
| Span Range | 2kHz ~ 3GHz in 1-2-5 sequence, full span, zero span |
| Phase Noise | -80dBc/Hz @1GHz 20kHz offset typical |
| Sweep Time Range | 50ms ~ 25.6s |
| RESOLUTION BANDWIDTH | |
| RBW Range | 3kHz, 30kHz, 300kHz, 4MHz |
| RBW Accuracy | 15% |
| Video Bandwidth Range | 10Hz ~ 1MHz in 1-3 steps |
| AMPLITUDE | |
| Measurement Range |
-103dBm ~ +20dBm: 1MHz ~ 15MHz, Ref.Level @ -30dBm -117dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-110dBm -114dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-110dBm (Span = 50kHz, RBW = 3kHz) |
| Overload Protection | Max. +30dBm, ±25VDC |
| Reference Level Range | -110dBm ~ +20dBm |
| Accuracy | ±1dB @100MHz |
| Frequency Flatness | ±1dB |
| Display Range Linearity | ±1dB over 70dB |
| DYNAMIC RANGE | |
| Average Noise Floor |
<-135±1dBm/Hz: 1MHz ~ 15MHz, Ref.Level @ -30dBm <-149dBm/Hz, typical -152dBm/Hz: 15MHz ~ 1GHz, Ref.Level ≧-110dBm <-146dBm/Hz, typical -149dBm/Hz: 1GHz ~ 3GHz, Ref.Level ≧-110dBm |
| Third Inter-Modulation | <-70dBc RF Input @-40dBm, Ref.Level @-30dBm |
| Harmonic Distortion | <-60dBc RF Input <-40dBm Typical, Ref.Level @-30dBm |
| Non-Harmonic Spurious |
<-93dBm, 1MHz ~ 15MHz, Ref.Level @-30dBm <-107dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-110dBm <-104dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-110dBm (Span = 50kHz, RBW = 3kHz) |
| GENERAL | |
| Display | 640 x 480 high resolution TFT color LCD |
| Split Windows | Active Window: Upper, Lower or Alternate (two simultaneously sweeping windows) |
| Markers |
10 Markers for peaks: 5 normal-delta marker pairs Functions: Delta, To Peak, To Minimum, Peak Track, Peak Table, Peak Sort |
| Trace Detection | 3 traces with Peak, Maximum hold, Freeze, Average, Trace math |
| Power Measurement | ACPR, OCBW, Channel Power, N dB and Phase Jitter |
| Autoset Function | Auto tuning the measurement result for observation |
| Trigger |
Conditions: Video, External (Positive-going, +5V TTL external signal) Mode: Normal, Single, Continuous |
| Sequence | Automated test by user-defined macros without any remote controller, 10 Sequential macro set and 10 macros per each set, Variable delays and wait-to-go facilitate automated measurement, Do-sequence links and nests different sequence sets. |
| CONNECTORS | |
|
RF Input |
N female, 50Ω nominal RF input VSWR: <2:1, @0dBm Reference Level |
| External Reference | Type: BNC female |
| Clock Input | 1M, 1.544M, 2.048M, 5M, 10M, 10.24M, 13M, 15.36M, 15.4M, 19.2MHz |
| Reference Clock Output | Type: BNC female, 10MHz |
| DC Input (DC Power Operation) | Jack : 5.5mm, 12V |
| DC Output (for GAP-801) | Type: SMB Male, outputs +9V/100mA Max. |
| INTERFACE | |
| RS-232C | Sub-D 9 pins female |
| USB Connector | USB Host/Device full speed supported |
| VGA Output | Front panel: Type A receptacle for USB flash devices |
| Option: GPIB Interface | Fully programmable with IEEE 488.2 compliance |
| POWER SOURCE | |
| AC 100 ~ 240V, 50/60Hz | |
| ACCESSORIES | |
|
User Manual x 1 Power Cord x 1 USB Cable (Type A plug to Type mini-B plug) x1 |
|
| DIMENSIONS & WEIGHT | |
|
330(W) x 170(H) x 340(D) mm Approx. 6kg |
|
| Opt. 01 | Tracking Generator |
Tracking Generator
- Frequency Range: 9k~3GHz
- Amplitude Range: -50dBm~0dBm
- Amplitude Accuracy: ±1dB@100MHz, 0dBm
- Amplitude Flatness: ±1dB@0dBm
- Harmonics: <-30dBc typical
- Reverse Power: +30dBm
- Impedance: Type: N female, 50Ω nominal
- RF output VSWR: < 2:1
|
|
| Opt. 02 | Battery pack |
* 11.1V Li-Ion battery pack *2
|
|
| Opt. 03 | ± 1ppm Stability |
* ±1ppm, 0~50 °C , ±1ppm/yr
|
|
| Opt. 04 | 300Hz RBW |
* RBW 300Hz, 3dB bandwidth, RBW Accuracy: 20%
|
|
| Opt. 05 | EMI Filter 9kHz & 120kHz RBW(*) |
* RBW selections: 9kHz & 120kHz, 6dB bandwidth, Accuracy: 15%
|
|
| Opt. 06 | 10kHz & 100kHz RBW (*) |
* RBW selections: 10kHz & 100kHz, 3dB bandwidth, Accuracy: 15%
|
|
| Opt. 07 | Demodulator (*) |
* Demodulation: AM/ FM
* Output: Internal speaker, 3.5mm stereo jack wired for mono operation
* RBW selection: 10kHz & 100kHz, 3dB bandwidth, Accuracy: 15%
|
|
| Opt. 08 | GPIB Interface |
* IEEE 488 bus
|
|
|
Note:
1. (*) Only one option can be selection between Opt. 05, 06, 07
2. All options are factory-installed except opt.02.
|
|||
| OPTIONAL ACCESSORIES | |||
| ATA-001 |
BNC Antenna
(An additional ADP-001 is needed for fitting GSP spectrum analyzers)
|
||
| ATA-002 |
Near Field Probe
(An additional ADP-001 & GTL-110 is needed for fitting GSP spectrum analyzers)
|
||
| GAP-801 |
Preamplifier Preamplifier with 10dB(typical), gain 9kHz ~ 6GHz
|
||
| GAP-802 |
Preamplifier Preamplifier with 20dB(typical), gain 9kHz ~ 3GHz
|
||
| RLB-001 |
Return Loss Bridge RLB Frequency Range 10MHz ~ 1GHz
|
||
| GTP-3000 |
Passive touch Probe Set
PR-03: Passive touch probe, SMA(F)
ADP-002: Adaptor, SMA(J/F) ~ N(P/M)
GTL-303: RF Cable Assembly, SMA(P/M), 600mm
|
||
| GKT-001 |
General Kit set
ADP-002: adaptor, SMA(J/F) ~ N(P/M) x 2
ATN-100: 10dB attenuator, N(J/F) ~ N(P/M) x 1
GTL-303: RF cable assembly(SMA(P/M),RD316,600mm)x2
GSC-002: Kit box x 1
|
||
| GKT-002 |
CATV Kit set
ADP-001: adaptor, BNC(J/F) ~ N(P/M) x 2
ADP-101: adaptor, BNC(J/F)75Ω ~ BNC(P/M)50Ωx 2
GTL-304: RF cable assembly(RG223,N(P/M)-N(J/F),300mm)x2
GSC-003: Kit box x 1
|
||
| GKT-003 |
RLB Kit set
GAK-001: termination 50 , N(P/M) x 1
GAK-002: Cap with chain, N(P/M) x 1
GTL-302: RF cable assembly(RG223,N(P/M),300mm)x2
GSC-004: Kit box x 1
|
||
| GKT-006 |
EMI Probe Kit set
ANT-01: 6cm Loop, H-Field Probe x 1
ANT-02: 3cm Loop, H-Field Probe x 1
ANT-03 6mm Stub tip, E- Field Probe x 1
PR-03: Touch Passive Probe x 1 ADP-02: N(P/M)~SMA(J/F) Adapter x 1
ADP-01: N(P/M)~BNC(J/F) Adapter x 1
Test Lead: BNC(P/M)~BNC(P/M) RF Cable x 1
Test Lead: SMA(P/M)~SMA(P/M) RF Cable x 1
|
||
| GRA-404 |
Rack Adapter Panel
Rack Mounting (19", 4U)
|
||
| GSC-001 | Soft Carrying Case | ||
| GTL-301 |
RF Cable RG 223 N(P/M), 1000mm
|
||
| GTL-401 |
DC Power Cord
DC power cord with DC Jack and lighter plug, Current 5A
|
||
Sản phẩm liên quan
CÔNG TY TNHH ITVC TOÀN CẦU
Tầng 6 Tòa nhà Thương mại, Số 22 Lý Tự Trọng, Phường Minh Khai, Quận Hồng Bàng, TP Hải Phòng.
Tel: 02253 261 208 - Hotline: 02253 261 208
Fax: 02253 292 718
Phương thức thanh toán
Copyright © 2014 ICTV. All Rights Reserved.
tư vấn iso, tu van iso, kiểm toán năng lượng, kiem toan nang luong
.jpg)