CÔNG TY TNHH ITVC TOÀN CẦU

Ngôn ngữ: vien

0914 564 579

Hours: 8AM-17PM (T2-T7)


Thiết bị thí nghiệm dòng điện cao

Máy thử nghiệm thiết bị đóng cắt tự động UPA-10 (10kA)

Máy thử nghiệm thiết bị đóng cắt tự động UPA-10 (10kA)

GiáVND


Chi tiết sản phẩm

THÔNG SỐ KỸ THUẬT:

Hãng sản xuất: KEP
Xuất xứ EU
Model:  UPA-10

Dùng để thử nghiệm và mô tả biểu độ đặc tính dòng điện (A)- thời gian (giây s)  của các thiết bị đóng cắt dòng điện AC tự động: Máy cắt, áptomat..., Thiết bị có chức năng ghi lại giá trị của dòng điện và thời gian chuyển mạch của thiết bị đóng cắt
Điện áp cung cấp 1 pha AC, V:     380 ± 38 hoặc 220 ± 22
Tần số, Hz: 50 ± 1
Dòng điện ra max tại nguồn AC 220 V, kA: 6,4 
Dòng điện ra max tại nguồn AC 380 V, kA: 9,99 
Dải đo dòng điện thử, kA:1 ... 9,99 
Dải đo dòng điện thử, A: 100 ... 999 
Do thời gian thử dòng điện,  s:     1 ... 7200 
Do thời gian thử dòng điện, ms: 50 ... 990
Sai số đo lường, % max: 3
Thời gian hoạt động liên tục min tại dòng điện max, s: 30
Công suất tiêu thụ lớn nhất, kW: 33
Trọng lượng, kg, max ( chưa bao gồm thanh cái ): 47 
Kích thước, mm, max: 535×358×200 
Tuổi thọ trung bình 10 năm
Cung cấp bao gồm:
- Bộ điều khiển UPA-10  1 cái
- Cáp động lực mềm tiết diện 110 mm2 (dài 1 m) 8 cái
- Kết nối ngõ ra RNO
- HDSD

Automatic circuit breaker tester UPA-10 is designed for testing and ampere-second characterization of automatic AC current circuit breakers. The device allows registering the value of the supplied current and timing the automatic circuit breaker switching interval.

UPA-10 is a mobile device, which could be easily transported to a required testing location.

 Technical Specifications

Parameter

Value 

AC power supply voltage, V

380 ± 38 and 220 ± 22

Power supply frequency, Hz 

50 ± 1

Maximum output current at AC 220 V (rms), kA

6,4

Maximum output current at AC 380 V (rms), kA

9,99

Measurement range test current, kA 

1 ... 9,99

Measurement range test current, A 

100 ... 999

Range of measurement time for the test current, s 

1 ... 999

Range of measurement time for the test current, ms 

50 ... 990

Reduced measurement error of the test current, %, max 

3

Absolute error of the current flowing time and the switching off time measurement in the range from 50 ms to 990 ms, ms, max

20

Reduced error of the current flowing time and the switching off time measurement in the range from 1 s to 7200 s, %, max

3

Continuous operation time at maximum current, min, s 

30

Highest power consumption, kW, max 

55

Weight control unit, kg, max (no flexible busbars) 

47

Overall dimensions, mm, max 

 535×358×200 

Lifespan, years, avg

 10

  Duration of the UPA-10 at different output currents 

Output current UPA-10, kA 

2,5

5

7,5

10

Voltage, V 

220

220

380

380

The inclusion of the primary winding 

-

=

-

=

The inclusion of the secondary winding 

=

=

=

=

Type of busbars: section  × length (mm), insulation

480 * × 2000 silicone

480 * × 2000 silicone

480 * × 2000 silicone

480 * × 2000 silicone

Temperature of the bars when thermothreshold switched off, ˚​​C

62

62

62

65

UPA-10 operating time before thermothreshold switched off

420

100

68

 36 

* - 4 busbars cross-section 120 mm2

 Operating Conditions

The device is designed for an indoors operation under the following conditions:

Condition

Value

Air temperature, °С

from -35 to +35

Relative humidity, %, up to

80 at +20° С

Atmospheric pressure, kPa (mm hg)

84,0 – 106,7 (630 – 800)

 Package Contents

Component

Quantity

UPA-10 control unit

1

Flexible busbar with cross-section 110 mm2 (length 1 m)

8

RNO connection outlet

1

RNO (Inom = 80 A)

Optional*

Cable for connecting RNO to UPA-10

Optional

Documentation

Manual

1

Sản phẩm liên quan



Copyright © 2014 ICTV. All Rights Reserved.

tư vấn iso, tu van iso, kiểm toán năng lượng, kiem toan nang luong

0914 564 579