Máy đo độ dày bằng siêu âm

Máy đo độ dày bằng siêu âm HUATEC TG3100 (300/0.1/0.01mm)

Giá: 10.650.000 VND

Chi tiết sản phẩm

THÔNG SỐ KỸ THUẬT:

Detailed Product Description

Features

1.Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials.

2.Transducer models are available for special application, including for coarse grain material and high temperature applications.

3.Two-Point Calibration function.

4.Two work modes: Single point mode and Scan mode.

5.Coupling status indicator showing the coupling status.

6.Optional software to process the memory data on the PC.

7.Optional thermal mini-printer to print the measured data via RS232 port.

Specifications

1.Display:4.5 digits LCD with EL backlight.

2.Measuring Range:0.75～300mm (in Steel).

3.Sound Velocity Range: 1000~9999 m/s.

4.Resolution: 0.1/0.01mm

5.Accuracy: ±(0.5%Thickness+0.04)mm, depends on materials and conditions

6.Units: Metric/Imperial unit selectable.

7.Four measurements readings per second for single point measurement, and ten per second for Scan Mode.

8.Memory for up to 20 files (up to 99 values for each file) of stored values.

9.Power Source:Two AA size, 1.5 Volt alkaline batteries. 100 hours typical operating time (EL backlight off).

10.Communication:RS232 serial port.

11.Outline dimensions:150×74×32 mm.

12.Weight:245g

Hãng sản xuất: HUATEC

Xuất xứ: Trung quốc

Bảo hành: 12 tháng

Configuration

	No	Item	Quantity	Note
Standard Configuration	1	Main body	1
	2	Transducer	1	Model: N05/90°
	3	Couplant	1
	4	Instrument Case	1
	5	Operating Manual	1
	6	Alkaline battery	2	AA size
	7
	8
Optional Configuration	9	Transducer: N02		Appendix A
	10	Transducer: N07
	11	Transducer: HT5
	12	Mini thermal printer	1
	13	Print cable	1
	14	DataPro Software	1
	15	Communication Cable	1

Probe optional (Appendix A):

Model	Freq. MHz	Diam. Mm	Measuring range	Lower limit	Description
N02	2	22	3.0mm-300.0mm (in steel)	20	For thick, highly attenuating, or highly scattering materials
N05	5	10	1.2mm-230.0mm (in steel)	￠20mm×3.0mm	Normal measurement
N05/90°	5	10	1.2mm-230.0mm (in steel)	￠20mm×3.0mm	Normal measurement
N07	7	6	0.75mm-80.0mm (in steel)	￠15mm×2.0mm	For thin pipe or small curvature pipe wall thickness measurement
HT5	5	14	3mm-200mm (in steel)	30	For high temperature measurement (up to 300℃)