ISO and quality management

CQI-15: Special Process — Welding System Assessment

2026-09-28 04:39:32 | Lượt xem: 3 | ISO and quality management

CQI-15 is an AIAG publication supporting assessment of welding processes. Identify the applicable customer requirements and assessment approach, and check the edition before using the reference material.

CQI-15 — Special Process: Welding System Assessment is an AIAG publication for assessing welding process management systems. ITVC Global introduces this reference to help quality, engineering and production teams prepare for assessment.

Original Annex B bibliography extract listing automotive references, including CQI-15 for welding system assessment.

Preparing to use the material

Identify the welding processes and product scope to be reviewed.
Gather customer requirements, work instructions and existing control records.
Assign responsibility for each group of topics and identify questions to verify on site.
Record findings, evidence and plans to follow up corrective action.

Check the applicable edition

Check the document you are using against the official AIAG CQI-15 page and customer-specific requirements. Reading a reference document does not replace assessment of the actual conditions in the factory.

The material in this article was compiled and introduced by consultant and trainer Pham Xuan Canh and the ITVC Global team. The download section below provides access to the material currently available on the website.