Reference list of ESD standards and technical reports

The following references can help identify documents relevant to an ESD-control programme.

Archived reference list: edition years from the original article are retained and are not a list of all current editions. ANSI/ESD S20.20-2021 supersedes the 2014 edition. Check each document’s current status and edition in ESDA’s official master list before applying it.

EOS/ESD Association - Document Masterlist and standards

ESD standards, test methods and practices

Personnel, ionisation and work surfaces

• ANSI/ESD S1.1-2013 - Wrist straps.
• ANSI/ESD STM2.1-2013 - Garments.
• ANSI/ESD STM3.1-2015 Ionizer
• ANSI/ESD SP3.3-2016 - Compliance verification of ionisers.
• ANSI/ESD SP3.4-2016 - Compliance verification of small ionisers.
• ANSI/ESD STM4.1-2017 - Resistance measurement of work surfaces.
• ANSI/ESD STM4.2-2012 - Work-surface charge-dissipation characteristics.

Device-sensitivity test models

• ANSI/ESDA/JEDEC JS-001-2017 - Device sensitivity testing using the Human Body Model (HBM).
• ANSI/ESD SP5.1.3-2017 - Human Body Model (HBM) testing practice.
• ANSI/ESD STM5.2-2012 - Device sensitivity testing using the Machine Model (MM).
• ANSI/ESDA/JEDEC JS-002-2014 - Device sensitivity testing using the Charged Device Model (CDM).
• ANSI/ESD SP5.4.1-2017 - Transient latch-up testing of CMOS/BiMOS integrated circuits.
• ANSI/ESD STM5.5.1-2016 - Transmission Line Pulse (TLP) testing.
• ANSI/ESD SP5.6-2009 - Human Metal Model (HMM) testing.

Grounding, materials and equipment

• ANSI/ESD S6.1-2014 - Grounding.
• ANSI/ESD STM7.1-2013 - Flooring resistance measurements.
• ANSI/ESD S8.1-2017 - ESD symbols.
• ANSI/ESD STM9.1-2014 - Footwear resistance measurements.
• ANSI/ESD SP10.1-2016 - Automated handling equipment (AHE) practice.
• ESD ADV11.2-1995 - Triboelectric charge accumulation testing.
• ANSI/ESD S11.4-2012 - Static-control bags.
• ANSI/ESD STM11.11-2015 - Surface resistance of planar materials.
• ANSI/ESD STM11.12-2015 - Volume resistance of planar materials.
• ANSI/ESD STM11.13-2018 - Two-point resistance measurement.
• ANSI/ESD STM11.31-2012 - Discharge shielding of bags.
• ANSI/ESD STM12.1-2013 - Seating resistance measurements.
• ANSI/ESD S13.1-2015 - Soldering and desoldering hand tools: resistance and leakage-voltage measurements.
• ANSI/ESD SP15.1-2011 - In-use resistance testing of gloves and finger cots.

Programmes, packaging and terminology

• ANSI/ESD S20.20-2014 - Development of an ESD-control programme; historical edition.
• ESD ADV53.1-1995 - ESD-protected workstation guidance.
• ANSI/ESD STM97.1-2015 - Resistance of the person/footwear/flooring system.
• ANSI/ESD STM97.2-2016 - Body-voltage measurement for the person/footwear/flooring system.
• ANSI/ESD S541-2008 - Packaging materials for ESD-sensitive items.
• ESD ADV1.0-2017 - Glossary and terminology.

Technical reports

• ESD TR1.0-01-01 - Wrist-strap technical report.
• ESD TR2.0-01-00 - Considerations for developing ESD garment specifications.
• ESD TR2.0-02-00 - Electrostatic effects associated with garments.
• ESD TR3.0-01-02 - Alternative ioniser-assessment methods.
• ESD TR3.0-02-05 - Selection of ionisers.
• ESD TR4.0-01-02 - Work surfaces and grounding methods.
• ESDA/JEDEC JTR001-01-12 - Device-sensitivity testing technical report.
• ESD TR7.0-01-11 - Evaluation of static-control flooring.
• ESD TR10.0-01-02 - Measurement and control issues in automated handling equipment for devices with damage thresholds below 100 V.
• ESD TR13.0-01-99 - Soldering-iron tip leakage voltage.
• ESD TR18.0-01-14 ESD Association Technical Report for ESD Electronic Design Automation Checks
• ESD TR20.20-2016 - Guidance for developing an ESD-control programme.
• ESD TR25.0-01-16 - Charged Board Event (CBE) assessment.
• ESD TR55.0-01-04 - Cleanroom guidance and evaluation.
• ESD TR50.0-02-99 - High-resistance measurements.
• ESD TR50.0-03-03 - Voltage suppression and electrostatic energy.
• ESD TR53-01-18 - Compliance verification of ESD-control programmes.