Máy hiện sóng số

LeCroy HDO4022 Máy hiện sóng độ nét cao (HD) (200 MHz, 2.5 GS/s, 2 kênh)

Giá: 237.600.000 VND

Chi tiết sản phẩm

THÔNG SỐ KỸ THUẬT:

Hãng sản xuất: Teledyne LeCroy - USA

Model: HDO4022

Vertical System
Bandwidth	200 MHz
Rise time	1.75 ns
Input Channels	2
Bandwidth Limiters	20 MHz
Input Impedance	1 MΩ ±2.0% \|\| 15 pF, 50 Ω ±2.0%
Input Coupling	AC, DC, GND
Maximum Input Voltage	1 MΩ: 400 V max (DC + Peak AC ≤ 10 Khz), 50 Ω: 5 VRMS
Channel-Channel Isolation	≥ 30 dB
Vertical Resolution	12-bits
Sensitivity	1 MΩ: 1 mV/div - 10 V/div 50 Ω: 1mV/div - 1 V/div
DC Gain Accuracy	±(0.5%) Full Scale, offset at 0 V
Offset Range	50Ω +/-1.6V: 1mV/div-4.95mV/div +/-4V: 5mV/div-9.9mV/div +/-8V: 10mV/div-19.8mV/div +/-10V: 20mV/div-1V/div 1MΩ +/-1.6V: 1mV/div-4.95mV/div +/-4V: 5mV/div-9.9mV/div +/-8V: 10mV/div-19.8mV/div +/-16V: 20mV/div-100mV/div +/-80V: 102mV/div-198mV/div +/-160V: 200mV/div-1V/div +/-400V: 1.02V/div-10V/div

Horizontal System
Time/Division Range	20 ps/div - 10000 s/div
Clock Accuracy	±2.5ppm for 5 to 40C + 1.0ppm/year from calibration
Trigger and Interpolator Jitter	4.5 ps (rms)

Acquisition System
Single-Shot Sample Rate/Ch	2.5 GS/s
Equivalent Sample Rate	125 GS/s
Memory	25 Mpts/Ch on 1 Ch 12.5 Mpts/Ch on 2 Ch

Acquisition Modes
Averaging	Up to 1,000,000
Peak Detect	na
Interpolation	Linear, Sin x/x
Enhanced Resolution	Up to 15 bits
Sequence Mode	Up to 10,000 segments

Triggering System
Modes	Normal, Auto, Single, Stop
Sources	Ch 1 - Ch 4, EXT, EXT/10, AC Line
Coupling Mode	AC, DC, LF Rej, HF Rej
Pre-trigger Delay	0-100% of full scale
Post-trigger Delay	0-10,000 Divisions
Hold-off by Time or Events	2ns up to 20s
Internal Trigger Range	±4.1 Divisions
Trigger Sensitivity	0.9 division: 10 MHz 1.0 divisions: 100 MHz 2.0 divisions: 200 MHz
External Trigger Sensitivity	0.9 division: 10 MHz 1.0 divisions: 100 MHz 2.0 divisions: 200 MHz
External Trigger Input Range	Ext: ±0.4 V, EXT/10: ±4.0 V

Display
Type	Color Touch Screen 12.1" TFT-LCD
Resolution	1280 x 800
Grid Styles	YT, XY

Trigger Types
Standard Triggers	Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified
Optional Advanced Triggers	na
Optional Serial Data Triggers	I2C, SPI, UART/RS-232, CAN, LIN, FlexRay, SENT, MIL-STD-1553, ARINC 429, Audio (I2S, LJ, RJ, TDM), USB, USB-HSIC, MIPI D-PHY, DigRF3G

Internal Storage
Waveform Storage	4 memory waveforms plus internal HDD
Setup Storage	6 setups

Math
Number of Math Traces	2
Standard Math Functions	Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Enhanced Resolution, Floor, Integral, Invert, Reciprocal, Rescale, Roof, Square, Square Root, Trend, Zoom
Optional Math Functions	na

Measurements
Number of Measurements Displayed	8
Measurement Parameters	Ampltidue, Area, Base, Delay, Delta Period @ Level, Delta Time @ Level, Duty Cycle, Duty @ Level, Edge @ Level, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Frequency @ Level, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Period, Period @ Level, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Time @ Level, Top, Width+, Width-

Probes
Probes	Qty. (4) ÷10 Passive Probes
Scale Factors	Automatic/Manual: ÷1, ÷10, ÷20, ÷100, ÷200, ÷1000, ÷2000, ÷10000 Variable: (÷1x10-6 - ÷10000)
Calibration Output	1 kHz square wave, 1.0 Vp-p, output to probe hook

Interface
GPIB Port (optional)	1 (optional)
USB (Device)	1
Ethernet Port	1
USB (Host)	6
Serial Port	0

Power Requirements
Voltage	90 - 264 VAC, 45 HZ - 66 Hz 90 - 132 VAC, 380 HZ - 420 Hz
Max. Power Consumption	330 VA

Environmental and Safety
Temperature (Operating)	5 °C to 40 °C
Temperature (Non-Operating)	-20 °C to 60 °C
Humidity (Operating)	80% RH, 31 °C 50% RH, 40 °C
Humidity (Non-Operating)	95% RH
Altitude (Operating)	3,048 m max at <=30C
Altitude (Non-Operating)	12,192 m

Physical Dimensions
Dimensions (HWD)	291.7 mm x 399.4 mm x 131.31 mm (11.48" x 15.72" x 5.17")
Weight	5.86 kg (12.9 lbs)