CÔNG TY TNHH ITVC TOÀN CẦU

Ngôn ngữ: vien

0914 564 579

Hours: 8AM-17PM (T2-T7)


Bộ ghi dữ liệu

Bộ ghi dữ liệu Hioki 8861-50

Bộ ghi dữ liệu Hioki 8861-50

 
GiáVND 


Chi tiết sản phẩm

THÔNG SỐ KỸ THUẬT:
 

 

Hãng sản xuất: Hioki
Model: 8861-50
Xuấtt sứ: Nhật Bản
Thông số kỹ thuật
- Số đơn vị đầu vào: 8 vị trí
- Số kênh: 
  + 32 kênh Analog
  + 16 kênh logic
- Thang đo: 5 mV to 10 V/div, 11 thang/ độ phân giải:1/1250 gí trị của thang
- Tỷ lệ điện áp (lớn nhất): 400V DC
- Đặc điểm tần số: DC to 10MHz
- Thời gian: 5µs~5min/div, 26 thang, Thời gian lấy mẫu: 1/100 của thang
- Chức năng đo: Đo tốc độ cao, tính toán thời gian thực giữa các chân, tính toán FFT, và các chức năng khác
- Dung lượng bộ nhớ: 32M-Word, 2M-Words/kênh
- Lưu trữ thiết bị ngoài: thẻ PC loại II slots × 2, Hard disk drive (option) × 1
- Hiển thị: 10.4 inch TFT color LCD (SVGA, 800 × 600 dots)
- Giao tiếp: GP-IB, USB2.0, LAN, Monitor output (15-pin D-sub, SVGA output)
- Nguồn: 
  + 100 to 240 V AC (50/60 Hz) (220 VA max. không dùng máy in)
  + 12 V DC (dùng DC POWER UNIT 9684)
- Kích thước, khối lượng: 330x250x284.5mm, 10.5kg
- Thiết bị đi kèm: Hướng dẫn sử dụng ×1, Cáp truyền thông ×1, Đĩa úng dụng
- Bảo hành: 12 tháng

  8860-50 8861-50
Number of input Units Max. 4 units Max. 8 units
Number of channels Max. 16 analog channels (max. 64 channels with scanner unit) + 16 logic channels (standard configuration) Max. 32 analog channels (max. 128 channels with scanner unit) + 16 logic channels (standard configuration)
Measurement ranges
(20 div full-scale)
5mV to 20V/div, 12 ranges, (using the 8956), resolution : 1/100 of range 5mV to 20V/div, 12 ranges, (using the 8956), resolution : 1/100 of range
Max. allowable input DC 400V (using the 8956) DC 400V (using the 8956)
Frequency characteristics DC to 10MHz (using the 8956) DC to 10MHz (using the 8956)
Power consumption 100 to 240 V AC (50/60 Hz) (220 VA max. printer not used)
12 V DC (use the DC POWER UNIT 9684 : option, factory installation only)
100 to 240 V AC (50/60 Hz) (280 VA max. printer not used)
12 V DC (use the DC POWER UNIT 9684 : option, factory installation only)
Dimensions, mass 330 mm (12.99 in) W × 250 mm (9.84 in) H × 184.5 mm (7.26 in) D, 8 kg (282.2 oz) (printer not installed) 330 mm (12.99 in) W × 250 mm (9.84 in) H × 284.5 mm (11.20 in) D, 10.5 kg (370.4 oz) (printer not installed)
Time axis
at memory function
5 µs to 5 min/div, 26 ranges, sampling period : 1/100 of range, external sampling, dual timebase possible
Measurement functions MEM (high-speed recording) REC (real-time recording) REC & MEM (realtime recording + high-speed recording) FFT (frequency analysis) Real-time Save (records directly to storage media)
Memory capacity 12-bits × 32M-Words/ch (1ch at 8860-50, 2ch at 8861-50) to 2M-Words/ch (16ch at 8860-50, 32ch at 8861-50) *Memory capacity can be expanded 32 times.(Optional memory board)
Data storage media PC Card Type II slot × 2, Hard disk drive (option) × 1
Recording paper (option) A4: 216 mm (8.50 in) × 30 m (98.43 ft), or A6: 112 mm (4.41 in) × 18 m (59.06 ft) selectable, thermal paper roll, Recording speed : Max. 25 mm (0.98 in)/sec
Display 10.4 inch TFT color LCD (SVGA, 800 × 600 dots)
External interfaces GP-IB (PC card), USB2.0 (series A receptacle 3 ports), LAN (HTTP/FTP/ Send mail or other), Monitor output (15-pin D-sub, SVGA output)
Supplied accessories Power cord × 1, Input cord label × 1, Application Disk (Wave Viewer Wv, Communication Commands table) × 1

Catalog

pdficon MEMORY HiCORDER 8860-50, 8861-50
Product catalog.pdf (5.69 MB) (2011-11-09 updated)

Sản phẩm liên quan



Copyright © 2014 ICTV. All Rights Reserved.

tư vấn iso, tu van iso, kiểm toán năng lượng, kiem toan nang luong

0914 564 579